HomeCategory

Space & Aerospace

Elio_1
Elio_2
Elio_3

Product description

8D ELIO range is 38999 sIII circular type connectors with insert for ELIO optical contact. It is used by Airbus as a standard on aircraft programs like A380, A350, A330 for all the communication using fiber optic.

The flight proven ELIO® fiber optics termini are designed around a robust 2.5mm ceramic ferrule. The assembly is as easy an ST connector. The insertion and retention inside the connector is ensured by a bayonet locking mechanism without any special tool. The termini integrates a seal inside the rear boot, thus the connection is sealed from the rear side without a backshell or a grommet. The 8D ELIO® range covers layout from 1 to 24 ways in all type of material shell.

Each cavity can be upgraded with the brand-new ELIOBEAM expanded beam ELIO® version.

In the female insert, the termini are flushed to the insert surface, thus making easy the fiber optical end-face inspection and cleaning, compared to the traditional dust collecting socket design.

The same termini part number can adapt tight or loose structure cable.

https://jowo.ag/wp-content/uploads/2021/03/Souriau-Logo-Produkte.png

Features & Benefits

  • Easy to use
  • Easy to terminate
  • Easy to clean

Additional information

Download PDF

ELIO/ 8D

Download PDF

ELIOBEAM
Protection_Caps_1
Protection_Caps_6
Protection_Caps_5

Product description

The protective covers series offer a wide selection of circular metallic caps for both bayonet and threaded coupling connectors. It provides EMI/RFI and environmental protection. Caps are metallic and can be plated with many types of conductive coatings. All the caps integrate a gasket to completely seal and protect your connector from harsh environments. A gasket made of conductive rubber will be preferred to reinforce the EMI/RFI protection. Caps can be ordered with various interfaces for bayonet and threaded coupling. Both American and European standards are covered, such as D38999, M26482, EN2997, EN3645, M5015, VG etc. The gasket can be made of standard non-conductive silicone, neoprene, fluorosilicone or EPDM. For high EMI/RFI requirements, conductive gaskets are proposed.

Mil standard link chains with retaining ring or eyelet are available. Other attachments such as wire rope, nylon cord in different colors and dimensions can also be ordered. Attachment solutions prevent caps from being lost. Nylon, ropes and other soft lanyards are a good alternative to metallic chain to protect the cap plating from dings or scratches

https://jowo.ag/wp-content/uploads/2021/03/Souriau-Logo-Produkte.png

Features & Benefits

  • Attachment options
  • Gasket material
  • Compatible with the main circular connector standards
  • Simple sealing solution
  • High EMI/RFI protection
  • Unlosable cap

Please consult us for other protection caps version or customized caps.

Additional information

Download PDF

Protection Caps
Backshells_1
Backshells_2
Backshells_3

Product description

Backshells are available in various versions: Band adapter, single cone adapter, double cone adapter, individual adapter, molded adapter, adapter with strain relief, straight, 45° or 90° versions.

Features & Benefits

  • Temperature range: from -65°C to +200°C
  • Tightness up to 1 bar
  • VG Approval: VG95319-1011 Version B, VG96912L Version B and many others.

Please consult us for datasheets, customized backshells and technical questions.

EN3645_1
EN3645_2

Product description

The 8D series is a highly reliable connector compliant to the main standards (MIL-DTL-38999 series III, EN3645, BACC63, CECC) and answer the most stringent requirements in harsh environments.

Available in 5 high end materials and 5 platings (8D aluminum, 8D composite, 8D titanium, 8D stainless steel and 8D bronze), the 8D series connectors fit all the corrosion, shock, endurance or firewall capability you will encounter. A full range of contacts are also available with 8D connectors such as signal transmission, high speed data transmission (quadrax, twinax, coax, ELIO®). 54 QPL layouts are available in accordance with MIL-STD-1560.

The 8D series is compliant with the MIL standard connector design with unique self-locking mechanism (patented by SOURIAU), visual mating indication, scoop proof, quick screw coupling and 360° shielding. The patented self-locking system and the metallic contact retention clip technology make the product perfect for high vibration applications or rough handling in the field. 8D connectors offer concrete RoHS alternative to cadmium. Esterline Connection Technologies – SOURIAU has more than 10 years of experience in producing Zn Ni with continuous improvements to comply with military and aerospace harsh environment conditions. Our Zn Ni connectors are the first one to be qualified by US Defense standards organization (DLA Land and Maritime). It provides the most cost effective solution for a cadmium alternative finish.

https://jowo.ag/wp-content/uploads/2021/03/Souriau-Logo-Produkte.png

Features & Benefits

  • Compliant to the main standards (MIL-DTL-38999 series III, EN3645, BACC63)
  • Available in 5 high end materials and 5 platings
  • 54 QPL layouts are available in accordance with MIL-STD-1560
  • Concrete RoHS alternative to cadmium

Additional information

Download PDF

8D Series Part 1

Download PDF

8D Series Part 2
EN3646_1

Product description

The EN3646 series is a compact connector using a self-locking mechanism with bayonet. Compliant with the MIL-DTL-26482 standard, EN3646 connectors are mainly used in applications with high performance demands like aerospace.

EN3646 connectors offer a large range of layouts, signal, power or mixed signal-and-power. A stainless steel version is also available to withstand environments with very long salt spray duration.

EN3646 connectors guarantee a proper and effective sealing at the connector interface and between the connector and cables due to its front and rear silicone elastomers parts. The quick coupling design is time-saving during systems assembly.

https://jowo.ag/wp-content/uploads/2021/03/Souriau-Logo-Produkte.png

Features & Benefits

  • Self-locking mechanism with bayonet
  • Salt Spray up to 500h
  • RoHS and REACH on most versions

Additional information

EN2997_1

Product description

The EN2997 series is an enhanced connector dedicated to applications in environments under high constraints in terms of vibration, EMI, and temperatures. EN2997 connectors are typically used in aerospace industry and more particularly on aircraft applications such as engines, sensors, external lighting, power and actuation.

EN2997 connectors provide upgraded vibration performance thanks to a self-locking mechanism with fine-pitched thread. The firewall design resists up to 260°C that provides a secure solution in case of engine fire.

The series meets the MIL-DTL-83723 design and offers additional features including shell to shell bottoming for enhanced

https://jowo.ag/wp-content/uploads/2021/03/Souriau-Logo-Produkte.png

Features & Benefits

  • Max Temperature up to 260°C
  • Random Vibration 5Hz to 2000Hz at 1g²/Hz
  • Salt Spray up to 500h
  • Electrical shell continuity below 5mΩ
  • RoHS and REACH compliant versions

Additional information

micro-comp_1
micro-comp_2
micro-comp_3

Product description

The microComp® series is a miniature high density rectangular connector.

microComp® shells are available in strengthened fiber glass material for a maximum mechanical resistance. Composite shells are up to 36% lighter than aluminum shells. The advanced «Nickel over composite» plating process used on microComp® has been qualified on SOURIAU MIL-DTL-38999 product range. This technology selected by Boeing and Airbus, provides optimized shielding and shell-to-shell continuity.

microComp® male connectors are tamper proof. On HD D-Sub and D-Sub male contacts are the fragile parts of the connector because they can easily be bent. On microComp® male contacts are fully shrouded by the insulator: they are protected and cannot be bent.

With its very short contacts, microComp® connectors have high Ethernet performance.

Fully Ethernet 100 base T compatible :

  • Fit up to 4 Ethernet links into a 25 ways microComp®
  • Compatible with standard Ethernet Quad wires
  • Reach up to cat 6 performances (TIA/EIA 568-B)

Fully Ethernet 1000 base T compatible :

  • Fit up to 2 Ethernet links in to a 25 ways microComp®
  • No need to ground the pins between the quads
  • Reach cat 5e performances (TIA/EIA 568-B)

As the product reliability is not the only key point to our customers, Esterline Connection Technologies provides an efficient worldwide distributor network with high level of finished connector stock allowing them the fastest way to get their goods on time. This is why major defense, aviation and industrial players trust Esterline Connection Technologies expertise and industrial excellence.

https://jowo.ag/wp-content/uploads/2021/03/Souriau-Logo-Produkte.png

Features & Benefits

  • Available in aluminum or composite version
  • Contact protection
  • EMI shielding
  • Ligther than micro-D or D-sub standard connectors

Additional information

Download PDF

Micro Comp
d-sub-space-grade_1

Product description

The space grade Sub-D series is a compact connector ideally suited to answer to miniaturization and weight saving trends in spatial applications.The large portfolio enables to serve most of the mounting configurations. Space grade Sub-D connectors are ESCC 3401, MIL-DTL-24308 class M and GSFC S-311 qualified (QPL).

https://jowo.ag/wp-content/uploads/2021/03/Souriau-Logo-Produkte.png

Features & Benefits

  • Compact solution for space saving on pane
  • Large portfolio of accessories to serve most of the mounting configurations
  • Nonmagnetic, non-outgassing
  • Cable side : crimp / solder bucket / wire wrap contacts
  • PCB side : straight and 90° PC tails contacts
  • ESCC 3401, MIL-DTL-24308 class M and GSFC S-311 qualified (QPL)

Additional information

Download PDF

D-Sub Space Grade
Arnic-600_1
Arnic-600_2

Product description

Compliant with ARINC 600 standard, Arinc 600 Serie allows you to build the rackable connector that matches exactly your requirements dedicated to equipment mounted in avionic bays.

Fully configurable, ARINC 600 series offers the opportunity to customize your interconnection, choosing from a wide range of insulators, and technologies ranging from signal to power, through high speed or optical solutions.

High density, ARINC 600 connectors can be fitted with up to 800 #22 signal contacts or 56 #8 power or quadrax contacts.

Blind mate and low insertion force, ARINC 600 connectors provide clearance for better rackability.

Using ARINC 600 series in your application, will save time from design to maintenance, using a front or rear removable contact solution.

https://jowo.ag/wp-content/uploads/2021/03/Souriau-Logo-Produkte.png

Features & Benefits

  • Rack & panelconnector, blind mate
  • High density, up to 800 contacts #22
  • Sealed andunsealed versions
  • Front or rear removable contacts
  • Available for all technologies:signal, power, coax, triax, quadrax & optical contact

Additional information

Download PDF

ARINC 600